• May 20, 2022

Is Fox Float CTD Good?

Is Fox Float CTD good? The shock comes equipped on many trail bikes featuring 100-160 mm of travel. It's lightweight and does a great job performing for the targeted market. It's a huge selling shock, and has become almost a “standard” which other shocks are measured by.

What is Fox Float CTD?

FLOAT CTD w/Adj model shocks feature a three-position Trail Adjust control that regulates low-speed compression damping only in Trail mode. 1 is the softest setting, 2 is the medium setting, and 3 is the firmest setting.

What is Fox boost valve?

Fox boost valve is in the compression fluid flow channel, having variable port size which closes smaller restricting fluid progressively as the shaft displacement's reserve chamber air or nitrogen pressure increases during compression travel.

What is a CTD fork?

The CTD Remote lets you to switch between the Climb, Trail, and Descend modes while riding. Each mode is optimized for a specific type of terrain, providing best performance and riding enjoyment. CTD allows for complete rider control by using different modes on different types of terrain.

How do you lock out a Fox rear shock?

Related faq for Is Fox Float CTD Good?

How much PSI is a Fox Float?


Rider Weight Air Pressure Shock Sag
120lbs (54.4kg) 150 psi 9-11mm
140lbs (63.5kg) 175 psi 9-11mm
160lbs (72.6kg) 200 psi 9-11mm

What PSI should I run in my rear shock?

For the rear shock, start at about half of your rider weight for air pressure. You will have to adjust from here, but you will want to achieve the proper SAG for your frame, as recommended by your frame manufacturer. Typically this is somewhere between 30-40% of overall travel.

Can I use Fox Float Fluid in rockshox air can?

For the air can, the Float fluid is just fine. Everyone uses nitrile seals.

What is a boost valve?

The BoostValve turbo boost controller is an adjustable pressure relief valve or "check valve". The BoostValve prevents boost pressure from opening the turbo's waste gate until the desired preset boost level is reached. Inside the valve is a precision stainless steel ball that is held in place by spring tension.

Are remote lockouts worth it?

Remote lockouts are useful on mountain bikes because they allow you to quickly change between a more efficient platform for non technical flats and uphills and a more forgiving platform for downhills and technical sections without ever having to take your hands off the bars.

Is fork lockout important?

A lockout is nice, but in no way essential. A fork will only really pogo around a lot if you get out of the saddle and honk on the bars. If you stay seated and spin a smooth, 80RPM cadence you won't get a lot of unwanted movement.

How do lockout forks work?

The lockout and rebound systems work by using pressurized oil to change the speed of compression and decompression. A completely disengaged lockout will allow the oil to flow quickly through the chamber while a fully-locked suspension will completely restrict the flow of the oil.

What PSI is Fox DPX2?

Do not exceed maximum air pressure: FLOAT DPS and DPX2 air shocks have a maximum air pressure of 350 psi.

How much air should I put in my Fox 36?

On a fork, it is helpful to place a ZIP tie around one of the upper tubes.. Generally, sag should be set to 15 – 25% of total fork travel.

Setting Sag.

36 float AIR SPRING SETTING guidelines
Rider Weight Air Pressure
170 - 185 lbs. 62 psi
185 - 200 lbs. 69 psi
200 - 215 lbs. 76 psi

How much should I pump up my suspension?

In most cases you'll want between 20% and 30% of the total available travel to be used as sag. Some rear suspension systems are designed to run a specific amount of sag, so check the recommended settings on your bike before you begin to tinker.

How do I adjust my Fox shocks?

adjustments are made using a small flat-bladed screwdriver on the eyelet at the end of the shock shaft. for slower rebound, turn the screw clockwise. the rebound adjuster has about 24 clicks of adjustment. the factory setting is 12 clicks out.

Was this post helpful?

Leave a Reply

Your email address will not be published.