• May 21, 2022

Do I Need A Front Chain Guide?

Do I need a front chain guide? Why You Should Run a Chain Guide

Mounting a chain guide on your mountain bike gives you an extra sense of security, hopefully ensuring that you won't ever drop your chain. When you are flying through rough sections of trail, the chain will jump up and down and can sometimes work its way off the chainring.

What is chain guide?

Chain guides are typically used in conjunction with a bash guard, an alloy or polycarbonate plate that is fitted to the chainset in place of the largest chainring and which prevents rocks, logs and other trail or racetrack obstacles from damaging chainrings.

How do you attach a chain guide?

Do I need a chain guide for a 1x10?

You don't need a chain guide because it's a hardtail. The N/W chainring and clutch RD should do the trick. I ride a HT with N/W ring and no dropped chains.

Can you use a front derailleur as a chain guide?

Sure, you can run a derailleur as a guide. No worries.


Related guide for Do I Need A Front Chain Guide?


Do Need chain guide with a clutch?

On those types of bikes, clutch-equipped derailleurs and chainrings designed to help keep the chain from bouncing off have made guides an option rather than a necessity for many (but not all) riders.


How do you install front chain guide?


Do chain guides work with oval chainrings?

Fully compatible with Oval chainrings

Absoluteblack Oval Guide™ is the Only chain guide on the market that is designed specifically for Oval chainrings. Extremely light and versatile, the Oval Guide™ chain guide secures the chain movement at every single crank position.


How does a chain keeper work?


How do I know my bike chain size?

For measuring the length of bicycle chain size, you need to do the following: Count the number of teeth on the biggest front sprocket and largest rear sprocket. You can find the numbers printed on the sprockets too. Next, you need to measure the distance between the crank bolt's rear axle and midpoint.


What is the use of chain guard?

While a chain guard is to protect your bike's chain. Generally, it protects your chain but mainly prevents the biker from getting trapped in the chainrings. There are different types of chain guards.


Can I convert my 3x9 to 1x11?

Yes everything will work, simply get the threaded version bottom bracket and done. Though NO REASON to change the crankset unless you want to. Just remove all the chain rings and replace with a narrow wide.


What MTB chain should I buy?

Which brand of chain should you buy? For optimal performance, it's recommended to match your drivetrain manufacturer (the most common are SRAM and Shimano) to the brand of chain. This isn't vital though – as long as the chain is made for your number of gears, it should work.


Is a chain guard necessary on a motorcycle?

Chain guard mainly reduces lube spray going everywhere and also assists in reducing the chance of your pillion getting his/her jeans caught in the chain, or in her case getting them dirty. Also ensure any luggage doesn't dangle into the chain. I've run plenty of bikes without chain/belt guards with no problems.


Can I just remove my front derailleur?

Removing the front derailleur isn't really a good idea, gear wise unless you have a good reason to. All you're doing is taking away the little mechanism that moves the chain from one front ring to another. If you're not happy with the shifting, get it tuned, not remove it.


How do you remove a front derailleur without a chain?

If the derailleur is riveted closed, you won't be able to take it off the bike without breaking the chain or destroying the derailleur. If you're going to replace it, then you'll need to break the chain anyway to put the new derailleur on. So if that's the case, then just buy a chain tool and new derailleur.


How do you remove a chain guide?


Do narrow wide chainrings need special chain?

The sole purpose of the narrow wide chainring is chain retention. Before narrow wide chainrings, it was always necessary to mount a chainguide to prevent the chain from dropping. Now when using a narrow wide chainring, you don't need to use a chainguide at all. This keeps thing nice and simple!


What is Iscg on a mountain bike?

International Standard Chain Device tabs. It refers to a particular configuration of three bolt-holes positioned around the bottom bracket shell on some bikes.


How do narrow wide chainrings work?

Narrow-wide chainrings have alternating narrow and wide teeth that fit into the inner and outer links respectively. This makes the chain more secure on the chainring and less likely to fall off. A narrow-wide ring is only necessary if you have a single chainring at the front and a rear derailleur.


How do you fit a MRP chain guide?


What size chainstay protector do I need?

One should get a Chainstay protector that is long enough to cover the Chainstay of the bike. Most Chainstay protectors have a length of 250mm. If you don't find this length long enough for you, you can double up or cut down an extra protector to fit the gap.


How do bash guards fit?


What size oval chainring should I get?


Do I need a longer chain for oval chainring?

Do I need a different chain for an oval chainring? All chains on the market except "half link" chain work perfectly fine with an Oval chainring. That is all 6, 8 ,9, 10, 11 and 12 speed chains are perfect for it. When riding singlespeed we recommend using 8spd chain for greater durability.


What size oval chainring should I use?

46T Oval chainring is best suited for fast hill riding with majority of gravel roads and some tarmac roads. 48T Oval chainring is best suited for someone who rides majority of tarmac roads and occasional off-road flat terrain. 50T Oval chainring is best suited for road oriented riders with occasional flat fire.


Can I use a 10 speed front derailleur on a 9 speed?

As long as your front derailleur matches the number of gears on your front chain ring (2 or 3) you should be okay. That being said, you may run into issues with different manufacturers or groupsets working well together.


What is H and L in front derailleur?

Limit screws are marked “L” and “H.” The L-screw will stop the motion of the derailleur toward the smallest chainring. The H-screw will stop the motion of the derailleur toward the largest chainring.


What are chain keepers?

The Chain Keeper is a guide to keep your chain right where it belongs. Mounted in place of a front derailleur, the Chain Keeper works with single chain ring drivetrains using a narrow chain. The chain block surrounds the chain as it meets the chain ring and prevents it from skipping off.


How do you deep clean a chain?


Was this post helpful?

Leave a Reply

Your email address will not be published.